Oster FPSTSMPL1 Manuel d'instructions télécharger pdf (Page 8)

InStallIng Your attaChmentS

to attaCh boWl

(ﬁgure A):

1. Rotate Control Knob to OFF position to turn unit off.

2. Unplug Stand Mixer.

3. Press Tilt Release button and tilt mixer head back.

4. Place bowl on bowl locking plate.

5. Turn bowl gently in a clockwise direction so that bowl

handles are perpendicular to base.

6. Plug into a grounded 3 prong outlet.

to remove boWl

(ﬁgure B):

1. Rotate Control Knob to OFF position to turn unit off.

2. Unplug Stand Mixer.

3. Press Tilt Release button and tilt mixer head back.

4. Turn bowl counterclockwise and lift off locking plate.

to remove attaChmentS

(ﬁgure D):

1. Rotate Control Knob to OFF position to turn unit off.

2. Unplug Stand Mixer.

3. Tilt mixer head back.

4. Press attachment upward as far as possible and

turn clockwise.

5. Pull attachment from beater shaft.

NOTE: It is recommended to scrape food off attachment

with a spatula/scraper before removing.

to InStall attaChmentS

(ﬁgure C):

1. Rotate Control Knob to OFF position to turn unit off.

2. Unplug Stand Mixer.

3. Press Tilt Release button and tilt mixer head back.

4. Align the key positions of the beater shaft and

attachment, push upward.

5. Twist counterclockwise so that pin aligns with

attachment notch and clicks into position.

6. Plug into a grounded 3 prong outlet.

NOTE: Align the key positions of the beater shaft

and attachment.

Figure A

Figure B

Figure C

Figure D

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Pas de commentaire

Oster FPSTSMPL1 Manuel d'instructions Page 8